Search results

Took my own advice and re-watched Romancing the Stone tonight. By re-watch it has been probably 30 years since actually seeing it. The croc eating the guy's hand was my only memory of the movie and terrified me as a child. Movie is great. Much better than The Lost City. We'll probably do Jewel...

Wow... I'm sold.

It made me want to go back and watch National Treasure. I also just assume this is better than the Uncharted movie I never bothered with. Brad Pitt was the best part. Channing Tatum and Sandra didn't have any chemistry. Super weird watching a 40 year old dude fawn all over a 57 year old, even...

It is very similar behavior to a few previous posters that have 86’d themselves from the forums before. On topic: I’ll give Blumhouse the benefit of the doubt here. They put out / produce a lot of stuff and not all of it is great but they still manage to drop some gold. They’re like the SciFi...

It is both. But that is the reason I don't want to dig too much up and risk damaging the surface roots and further down any other. Building "up" may not be ideal but hopefully even with felt and mulch on top would allow them to get rain and not kill the soil beneath, etc. I'm not worried about...

Thanks for the input. It’ll be a process but yeah I’d like to get that area a little more grassy. I think for the play area rather than trying to dig all that whole area out and remove a metric half ton of earth I’ll build my perimeter with stacked / recessed landscape piers. Do a layer of the...

Will spoiler these for size and try to answer. Not sure how to break up your quote to specific points. To address your last paragraph: Yeah, there is a big drain problem here for sure. My previous house's yard wasn't laid out anything like this. Was barely a yard since I was on the side of a...

The third mage hunt? The Poison one? I have no idea if all these are the same order for everyone. I just did that one at level 6 with the Fire sword I made after killing the 1st mage. Took like 2 tries. It was funny b/c one of the green spear knights ran in to the fight and I just sorta hung out...

Only had about 30 minutes to try this out tonight, did the 1st mage hunt. Seems pretty good so far. I mean, basically seen nothing and only have the 1st couple of skill points.

Does the packet loss exist on both wired and wireless connections to / through the Orbi? I know you mention hard wired above but didn’t know if that meant, to everyone, a client laptop connected directly to the CM or the Orbi. If it happens both wireless and wifi through the Orbi, is it...

Do they have a Kickstarter? I’d fund it just to read the pages of ways Utnayan would come up with to express his hatred and disapproval. They’d have to invent a new thesaurus.

Yeah that's the same link I posted, I think? Ordered one right after posting and it has already shipped. Also included the slip case.

There was a special edition of this series that Subterranean Press was putting out with Grim Oak Press... But I can't get the link or page to work anymore. The announcement was 5 days ago and it said 1,000 copies available. Maybe it is already gone...

Got our 1/4 beef in yesterday. Took a bit to sort it all and make room in our chest freezer. Now I gotta start hitting this thread hard for ways to make a dent in it all between two of us. Processing sheet where we split a 1/2 with some friends.

Aw man this is only on Epic Game Store?

The key to success: Mine came in today. Nice organized packing. Will be a few weeks before I do anything with it but looking forward to the project.

I never had that problem b/c I played a Paladin.

Thanks. I'll get a couple more pics and details tomorrow. Don't want to segment the conversation too much without answers to your questions.

I went all Ego line for my blower, edger, trimmer, etc but stuck with a Craftsman gas mower. Even with a small yard it felt like electric wasn’t quite worth it. The Craftsman was $100 something and still uses the Briggs and Stratton engine. So far have been happy with it. I’m sure I would have...

Got so frustrated with my printer and desktop wifi today that almost impulse bought the Alien, then talked myself out of it. The UDM Pro is really what I want to do with combination of wired devices, wireless devices, and cameras. Damn thing just isn't in stock though. Maybe I can spend the time...

I'd jump on that for sure if you were interested at all in owning a planar. The DeWalt DW735 (or X model) is like $500+ can't remember what the deal I got at Lowe's was. This one is only single speed it looks like, but does that really matter? Ridgid has questionable longevity with Emmerson not...

Well your point is still wrong. It works exactly as I have been describing. I tested the balance every 1/2 turn of the adjustment screw with the exact same results. No setting allowed me control over the vertical tilt of the monitor. Every position the monitor tilts itself back up. The lightest...

Thanks, will watch tomorrow since I’m already in bed. But the 2nd response from the Ergotron rep basically sums up what I’ve been saying. Even with it turned completely counterclockwise, at the loosest setting, it still moves to tilt up. I cannot adjust it (turn it counterclockwise) enough to...

Okay look, I have it, I set it up and have the instructions. The screw turns both ways, one way tightens it and increases the resistance and one way decreases the resistance. If it is fully tightened the damn thing doesn’t move at all and points up to the ceiling (not really, exaggerating). If...

That does make sense and probably why it hasn’t been noticeable in actual use and only stood out while setting it up. As far as adjusting though, that screw is as loose as it will go and still forces it upwards. But, see above, it won’t end up mattering and your explanation makes sense. If I...

Came in on time and got it set up on the Ergotron. Only thing so far with the arm is that the TUF doesn't seem to be heavy enough to keep the "head" of the mount level, even on the lightest setting. I can tilt it down to face straight on but the springs are so tight it tilts back up slightly. In...

Thread title should be “Blizzard’s Warcraft Arclight Rumble” because they can’t go two sentences without saying the whole name Warcraft Arclight Rumble. They can’t stop doing Warcraft stuff and reminding us. And they couldn’t name it Warcraft: Arclight Rumble. Apparently this name irritates me.

Picked one up today, was very good. Better than Grape which is my go to since Red is non-existent these days. I'll stay away from them for my own benefit :)

Put a couple of hours in this yesterday and so far really enjoy it. Very charming atmosphere, the way the "tutorial" and instructions are handled are cool and unique (to me). It is something that feels well put together and fun to explore. Maybe a Zelda-Lite in some respects that it was going...

Need to try this, maybe tomorrow. I cut out almost all Monster but still cheat once every few weeks. The new Mt. Dew Spark Zero was okay. The Flaming Hot was not hot. Just an annoying aftertaste and after two swigs was too sweet to keep trying. I’m 95% regular water and Topo Chico these days...

Who knows how the whole conversation played out. Probst, at any time, could have pointed out exactly what you mention. He also could point out the 4 black winners in 40 seasons and how that’s almost exactly on par with population statistics. Not to mention the Asians, Latin American, Women, and...

It would explain the “connection” that Rhett (or is it Perry? Who really cares) has with Autumn and their cryptic conversations. Very dumb idea though. Any father would recognize his child immediately. That whole idea is used throughout history in stories. And the age difference between Amy and...

If I ever get the bench on my side wall cleaned off I'm planning the same thing. The previous owner had "something" there because there is already a cutout to sit the miter saw in. Lemme know how it goes for yours and post some pics. Then I'll just steal it and won't have to think much about it!

I try and allot enough time at the end of the work day to clean up and then at the end of a project more or less do a reset. Use the leaf blower to blow out the shop, sweep, vacuum, dust everything down. Then turn around and junk it up again lol. The polyaspartic flooring really helps to...

Looking at a Wood Equilibrium Moisture Content Table, and adjusting for the Average RH and Temperature in Arkansas, I'm just gonna do what you said. Based on the history of this wood it came from an F3 in NW Arkansas / Madison County in 1996, had been kiln dried and air dried since then. Was...

You had me interested so I looked at the hand written receipt carbon copy I have :) 8/4 Short is $8.00 bf * 6.344 bf = $50.75 #1 Common is $5.00 bf * 4.38 bf = $21.88 4/4 FAS/SEL is $8.10 bf * 21 bf = $170.10 4/4 13" is $12.00 bf * 8.33 bf = $100 $340 + tax so $370. Worked out to $9.25 / bf I...

Picked up my Cherry stock today. 8/4 63" for the legs 6' #1 Common Cherry for internal drawer dividers 10" and 13" boards for the aprons and top Will probably use the 13" + 2 of the 10" for the top and cut my aprons out of the remaining 10" board. They're all 8' and based off my cut list that...

Gave Nightmare Reaper a shot but refunded it. Seemed like it would be a nice retro shooter but just didn't click for me. Also had extremely bad stuttering every time a new music track would start, I opened a chest, and at various other points. Not going to mess with trying to get a retro style...

I kind of bucked trend a bit and went with the Asus TUF VG34 and Ergotron HX arm. The Asus had very similar reviews to everything on rtings and I’ve been an Asus monitor fanboy for about a decade now, so it seemed like a fair choice. If it gets here and it looks like I can fit a 38” though I...

We rewatched Star Trek II: The Wrath of Khan and Star Trek III: The Search for Spock. Rewatch for me, basically first time for her. Honestly Search for Spock wasn’t nearly as bad as I remember. A few years of piling on the negative memories of it really had me dreading going through it, but...