Search results

I enjoy raking and bagging the leaves but wouldn't hate figuring something else out. Didn't try mulching last year but mowing with a bag didn't pick up nearly as many as I would have thought. The "sucking" of the mower is probably much less effective than just spinning it around and chopping...

Just catching up on all this... Immortality - Downloading and will give it a try Assassin''s Creed Odyssey - Think I tried this on Ubi's launcher and gave up b/c my old system didn't run it well so want to give this another shot. Danganronpa V3 - This showed up in another thread here and I...

That’s a cool idea. I may get material this weekend and will go ahead and look at the Amazon option. I know that there were other “brand name” versions too. Wasn't 100% sure if that deserved a Word or a Thumbs Up.

I'll offer a slightly different perspective from when I remodeled my 1st floor that included kitchen, living room, 1/2 bath, hallway. It was initially split tile / hardwood between the kitchen and living areas. When the water damage ruined the hardwood it "had to" all be replaced. I tested a few...

Thanks for bumping a thread where I had not only the last post but an overly creepy one at that. Let's just say it was a different point in my life and things weren't going so well and move past. Great show though. It really was a "so bad it is good." And in retrospect I do agree with @Void

Had a nice dinner tonight with the owner of a consulting firm and looks like we’ve reached an agreement to move forward. We settled at $125 / hr which is a little lower than I wanted but in the end should be fine. There’s language in our contract to rise $5/hr after 6 months and we’ll resign...

The following caveats apply: - I'm an idiot - I'm an idiot electrical engineer with no mechanical engineering background (I think a mechanics class was required to graduate) The first video was funny when it came out and pretty sure it was posted here because naturally every YouTube woodworker...

Incoming Stumpy Nubs history video!

Yeah that was one modification I really want to make so thanks for reminding me!

When I’ve done this in Fusion it only involves making the depth and outline allowance. I figured it won’t be articulating in Fusion so placement and depth works to give me an idea. That’s not telling you anything you don’t know already. Actually having a hinge model would be useful. But there’s...

Costco had some very cost competitive sheds out on display last weekend that would hold that. I almost bought one just to have until picking a place to sit it.

I found a picture of a changing table with drawers, which really is just a dresser with a slightly different top which could then be added to / stacked with shelving or additional drawers down the line. I like that idea though. A place to put diapers, baby clothes, Etc and something to grow in...

Did you ever see the thing they released with Black Flag? Probably was after that. But it was a site that tracked all your achievements from all your AC, had different unlocks, different DNA story stuff. Seemed like it had a ton going on behind the scenes. Then it pretty much disappeared one day...

I’ll never understand how with a combined approximate 1,900,000,000,000 hours of football on record defensive coordinators still opt for this stupid bend don’t break prevent give up 15 yards a play set up.

Such an uncharacteristically undisciplined Bama team. They get away with so many calls throughout the year but you can’t even hide how blatant these are. Oh hi Texas chick…

Apparently he wasn’t going to call roughing and meant to only call targeting but said both. Who knows. Trying to keep up with closed captioning.

They tried to fuck Texas so hard even the announcers and Mike P calling their bullshit.

That’s really awesome! How did you do the box joints? I have a project in mind that will require a ton and was considering building a jig or getting one off Rockler. I’d probably do the jig 1st just to see how it works out. In other news we just found out we’re expecting tonight. Already...

It was an easy autobattler and early on p2w wasn’t really a requirement. My team could clear almost all the content and wasn’t any ultra rare people. I probably have a spreadsheet saved somewhere. The appeal was kind of like min/maxing your runs to see how efficiently you could grind something...

This is true. Even if it isn’t no one would disagree with you, which still makes it true.

As it pertains to this board, at least, my belief is the anti-consumer expectation was baked in. There were early reports that kicked it off and few people have any confidence that any company these days dare learn from their success. It was obvious Sony learned nothing about why the previous...

Yeah I got about 20% through yesterday before falling asleep. Not because of the book, it was just late. Haven't re-watched the trailer since reading though. Some things are immediate "well they aren't going to be able to do that!" but could do similar concepts.

It is sagging terribly. Basically has no chance of closing unless it is manhandled, which is how some of those pickets are already broken and pulled off. The posts themselves are 6x6s and seem very sturdy and supported but I need want to double check them before hanging anything else. All the...

You piece of shit didn’t respond to my gate building question in Home Improvement thread! We could have been project buddies!

So many people are doing kumiko stuff right now I almost feel required to do a project.

That's awesome!

Agree. I almost made a separate scraps cart but ended up just throwing them in a tub and slid under my long bench. There's too many in there but I'm constantly using them to test cuts before doing the actual one so I feel justified. For the wall mount, on two levels of one of them I cut down a...

I have two sets of the Bora wall mount wood storage and no problems believing the weight capacity. One of mine was irresponsibly loaded with scraps. I’d recommend those for sure. A couple of lessons learned about installing them and where if you eventually get them.

But that's how you know it is working.

My current gate situation I need to fix. I knew when we bought the house it would have to be replaced so glad we got a year and a bit out of it. Not scared about doing it myself but have never done a gate. There's about an 11" drop from post to post. I guess the point was to maintain the fence...

As @Goatface mentioned there are a lot of styles for that. Rockler had a sale in one of their Labor Day emails for their Folding Workshop Brackets (Rockler Rock-Steady Folding Worktop Wall Brackets). I'd look at something like that then compare prices. You can search Pintrest or Google for DIY...

Luna our new GSD 9 weeks old

I tried to read most of the posts but they all got jumbled together. Anyways, Episode 1 was meh to us. We may get around to Episode 2 or may just keep watching Sprung b/c of Greg Garcia and Garret Dillahunt. Elf language stuff reminded me of every time someone tries to over-pronounce Italian...

Repairing my washer, dryer, refrigerator, and umm oh installing new dishwasher. I really found a lot of fun doing it myself. It isn’t for everyone but the idea of paying someone $120/hr to do something + $80 service call out or whatever. You can find anything on YouTube. Of course you do it...

Does that play pretty well in 2022? Any mods that would improve anything? Definitely pick it up for free, but wasn’t sure if anyone had recently gone through it recently.

I hope this is true it just seems painfully naive unfortunately (not that you’re naive, painful for me to think about). Someone made the decision to do that and they’ll want/need to show a return on that investment. From doing what they’ve been doing would be a neutral so in steps so-and-so to...

The CNC Thread may get more traffic. Not sure how many people know this Woodworking thread exists. https://www.firesofheaven.org/threads/cnc-lasers-routers-etc.11758/ This thread is reserved for me complaining about the state of my workshop! 🤪 j/k! I’ve learned a lot from both threads. I...

Huh.. well then