Search results

Anyone have one of these? Would like STEP files

Large print, 219.5mm. It's making this lumpy line, like they're lapped or something. Twice now

TPU leg dampeners printed nice, aside from the artifact on the side there. IDK

I agree, I used .4 mm lines for these fins, all printed easy. Could use directional flow. https://www.thingiverse.com/thing:5232488

DIY on Fusion 360: Extrude a .375 hole 5 inches, create wrap with 'coil' 30 revolutions, size appropriately. I used square profile for better printing but now I'm curious if circle works

Envious* Anyways , this is an idea I had. Not sure if I love it yet. So far it's nice.. THIS simple print took under 2 hrs in TPU at .1mm layer height, 220deg 55 bed 25mm speed. 25%infill It made about a 7 inch cable wrap. It's a 50% scale (2.5in tall) of another one that took 15hrs, also...

TPU 25% infill, somehow it printed straight up 5 inches. Had to break it free obvs, but it protecs

The matter hackers use a 25% carbon 75% nylon, like the SainSmart amazon shit. I'll let you know how it is. Half price compared to matter hackers

Is Carbon Fiber the common name for the nylon carbon blend? I'll let you know how it is. Maybe start with nuckles dusters? Haha This TPU cord wrap at 20mm and .1mm thickness looks good enough I think other than the shitty clean up

I do need good carbon fiber settings, I got the SainSmart from Amazon 25% Caron Nylon

I tried to change the offsets, because the home position moved. Almost have it figured out. The new firmware is better though, mesh leveling. Printing this TPU spring/cable management solution

Started the upgrade to microswiss at 630 am. Finished at 1pm. Still struggling to complie the offset to firmware. And it made the screen landscape

Carbon Nylon is why I got into printing, yesterday. Haven't got the metal hot end/ extruder installed, printing the shroud in PLA now. The Carbon is in the mail. But TPU has caught my interest too now that I have a printer

I did, I fixed a saggy belt mid print and had to restart. Haven't printed much TPU, but thinking of using it in tension here (in red) for an enclosure clip.

This corner closure in TPU would be nice I think

Designed and printed this simple version of 1/8" plexi enclosure Which I don't like, and started drawing a new one. Going to add TPU pads on plexi face I think. Need to test prints

Ender 3 V2 test print.i got the direct drive and metal MicroSwiss setup. Going to print Voron parts, hopefully, in carbon/nylon. 25% carbon, someone said they call it Black Aluminum

I saw a vid comparing that and didn't like the smaller nozzle or flow on the rat rig. The voron prints faster (from what i gathered) and I'm a up for the task of putting one together. 600 is huge and awesome. But I think the next step for me would be a 80"-120" on a rotary table custom build...

I'm thinking of snagging a cheaper one to get some XP and printing my own parts for eventually and possibly the never version Voron 2.4 Missed the ender 3 for $100 at microcenter

I've been drooling over the Voron 2.4 Don't think I want the commitment yet

Laminar flow. It's like a jet now instead of turbulent scattered air

First prototype shows promise. The baffling for flow directing works extremely well. I was astonished. The air shot out in a beam not quite at 45deg but 40 probably. Much success. Have to add chamfuer for the screw heads to fit perfect and figure out acces for screws, maybe a clipping system...

Need 2 for a 90°

Does FoH have file sharing?

I get good recommendations about creality and I just saw a creality Ender 7 review, looks like my guy. Space is smaller than the 10 but 5 times faster than this one I'm using. Also at my max budget of 750ish

Looking at buying the Creality CR-10S Pro V2, nice size for my needs and nice price. Thoughts?

I designed this PC case mod for my case fan. To redirect the air flow

Air flow from the front is bad. Look at the front panel with the tiny slit and nothing more. Anyways, I added two intake fans to the front. They seemed to pull air in somehow

Yea, I saw a YT video that said the same about the case but he didn't even have the PC he was judging by pics. I've not noticed any thermal throttling but I'm gonna check it out when i get back home.

It has a front vent, 3x140mm back and top, and a front 120mm case fan. Also top is a mesh. Also it sits on cold concrete in a cold basement. Also considered upgrading and selling this, MicroCenters PowerSpec look cool, not a bunch of RGB

Maybe an aio for CPU?

I like upgrading my PC, I used to build PCs for MidwestMicro. Started as a Skytech prebuilt Upgraded the ram to 32 but in a rush I didn't check QVL and it runs at 2133hz, have compatible 3000hz ram on the way. Upgraded PC to Ryzen7 3700x and added nvme and second SSD Where does it stop? Do...

We'll see

Deuteronomy 22:5 The woman shall not wear that which pertaineth unto a man, neither shall a man put on a woman's garment: for all that do so are abomination unto the LORD thy God.