Search results

Made my drawers out of 3/4 baltic Berch cause that is what I had, turns out these fancy ass drawer slides are 5/8 max, back to the lumber yard.

For hand tools I enjoy Rob Cosmans stuff, his how to videos are top notch but I avoid his reviews because no matter what he just picks lee neilson/valley or woodcraft, its like yeah of course they are the best but not everyone can afford them so what about some other options. In the world of...

My son has been begging to play this, so I thought I would check it out, Its ok but I'm confused about something, I have played maybe 10 games, and the only time I came in under 3rd place was when I fell out of the helicopter. This is not a brag. I just don't understand how an almost 40 year...

Woodcraft has 20% off whiteside bits this weekend only if anyone needs some

I have those same harbor freight pipe clamps, they are awesome cause I can make them any size just by getting new pipe What i really need is about $1000 more of these

I agree, I enjoy using my power tools, especially for cutting, but using my planes, card scraper and Chisels is very therapeutic and enjoyable, I get such a sense of satisfaction pulling a long thin spiral from my plane.

Also follow up on Whoos point about danger, while it is much more expensive, if you are at all worried about a table saw, look at the saw stop, but even if you do get one of those make sure you research alot about kickback. I am gonna probably get a Sawstop next not because I am that worried...

Yeah my wife parks in the garage and all the bikes and gym equipment is also there so I don't have much room either, requirement for our next house is either a 3 car garage or space for a large shed. I believe the festool, which again is like $1800, or the Bosch which is alot less like $500...

I don't have either but I would love a drill press, would be great for roughing out mortises, getting perfect holes with forstner bits. For cutting down long boards I don't want to put on the table saw I use my circular saw with a speed square and to cut tabletops to final length I have this...

@Noble Savage I honestly don't think a miter saw is that necessary, it isn't that accurate unless you get a festooned for mucho $$. You can do pretty much do what a miter saw does with a table saw and either a track saw or circular saw. Jigsaw is useful i love my dewalt xr. I would also suggest...

If anyone needs a gripper, I love mine and this comes with some accessories https://slickdeals.net/f/14564063-microjig-grr-ripper-3d-pushblock-grr-ripper-1-8-inch-leg-accessory-54-free-s-h?src=frontpage

My guess is

Might read it but the last audio book killed things for me, barely made it through, the whole graphic audio won't be out till March 2021 so may wait for that

As much as I like Gardner my favorite lantern is the best lantern

So like $4 in real money? Cool painting though.

Corner key dowels for mitered corners Need a little clean up with the plane still

I have the Grripper and it is great, feels safe and helps with alot of cuts, especially small cuts. Were you ripping or cross cutting with the finishing blade? The more teeth the less it can clear sawdust so it has to work a bit harder.

@Captain Suave Mine is the dwe7485, which is the 8.5 inch version, works for my small garage shop, but saving for a sawstop once we move and I get more garage space. I don't have any issues with the miter slots not being parallel, there was alot of wiggle in the stock miter guage, I fixed that...

When you already started your glue up an realize your off 1/32 on you sides, glad I built a decent cross cut sled Starting to come together

My 2 current projects Ukulele for my son from the stew mac kit And a desk for my friend, she wants 2 drawers, so we will see how that goes, sanding the tabletop today and then laying out the apron and drawers next

I feel like it is more about being anal/ patient enough to measure a million times before each cut, there are times where it takes me a half hour to make one cut. And I wish I was much better at my instruments but I'm hoping with practice I'll get there.

13 in. Three Knife, Two Speed Thickness Planer No. 5-1/2 Jack Plane

We get them in the pool sometimes, vicious bastards covered in flees and ticks, one they get a liking to the yard they gotta go

I love my Freud blades, I have the full kerf flat top rip blade and it rips like butter and is great for dados and joinery. If you don't mind switching it out for good cross cut blade it is awesome, if you hate changing blades just splurge for a forest woodworker 2 I guess

Drown that fucker

He has already set his mind to playing the adventure time theme song first, which is super easy so shouldn't take long, seems like all those cartoon network shows have ukulele theme songs.

We went with the concert size, we can always go to a baritone as he gets bigger, he can also maybe graduate to my mandolin at some point since they are both based on 4 strings

I bet he got paid anyway

Made the mistake of taking my older son to Rockler this weekend, ended up with another project.

I don't jave a planer or jointer right now, and no space for anything other than maybe a dewalt 735x, I just suck up the cost and buy S3S lumber and dig through the pile for flat boards. Needed an extra board of beach for the desk I'm currently working on, went in yesterday and they had almost...

Not trying to get political but this showed up in my feed and made me fuckin laugh

Spoke to soon, it lives on.

Supposedly... I remember he posted a few photos of this guy way back in the day,, this is something i saved from the original forum days

Well there goes my easy likes for trolling him with

Horror movies were way better when they were mostly about boobs.

https://www.roadtovr.com/stanford-vr-motion-identity-research/amp/

Should have had him paint this