Search results

Path of fire is a really good expansion and I recommend you go through it. This expansion the story is pretty bad and filled up with current politics and diversity references. The last fight was really fun and then they bamboozle you in the final step of the story. Overall the game is still...

As someone who has a shit oven I'm really interested in one of these but I've never used a wok. 1. Did you pick a better pan to go with it and will any "better" wok pan work or does it have a special shape? 2. What all do you cook in it, I guess what foods would be the limitations? 3. If you...

Welp, story ends in a lesbian wedding, I'm not even joking. I'll probably get banned for talking shit about it in Map chat.

Getting towards the end of the story and I guess they couldn't help themselves from dropping in diversity and current affairs into the game, disappointing really.

That's what it was!

You were talking something up the other day and now I can't remember what it was, it'll come to me though.

One of the best parts about this game is you can be viable with what you find "Fun". You may not be 100% effective but if you like to run a high survivability condition spec you can do so. Experimenting and figuring out what works for you is fun as shit.

You have defended every single shit game in the past 2-4 years. You have to be trolling at this point.

I dont know how much better they are but they are so much more fun that it's hard to go back to the original ones. The necro has a sick katana now. One of the major characters wields it and it looks dope.

I hate Ketchup but that spicy is on another level. Shame you didn't get the biscuit, worth it

Please tell me you got the spicy ketchup as well as a spicy honey butter chicken biscuit.

There hasn't been a new spec that I haven't liked from the last few expansions. You can also try before you commit on the 80 boost you get. You activate it, it transports you to a level 80 zone and allows you to go HAM for a bit til you decide to keep it.

Tons of free items in the shop for anyone hoping back in. Make sure to claim them.

You're going to love the Guardian class, lol. @Hatorade and I are back in the mix again if you want to get rekt doing stuff or need help.

Not a bad expansion so far other than them just absolutely beating you over the head with Female characters. Rolling a thief this go around and the new spec is very strange to me so far. You port around casting shadow wells (AE) that does different things and it's very difficult to get used to...

Avatar checks out.

The MMO section already has an LOTRO thread. You're all up in the wrong section my dude.

lol, naw. I wasn't going to that extreme. I was just modeling more assemblies and parts and mating them together myself after printing them. Fusion is my first 3D modeling program and I just watch tutorials as I get stuck. Since I come from a 3 axis CNC background my mind works around not...

I'm still trying to get a handle on 3D space sketches, I didn't even know it was a thing until I was attempting a bent pipe.

I like Lars videos as well. He does a good job of explaining things.

I learned a few things in that video as well. One of my favorite things about 3D modeling is you can do things in multiple ways and still get the same results depending on what makes sense to you and your thinking process.

We did it boys, we made it to the Rickshaw!

I only really play Chivalry on EGS and now it's on steam so.... yeah. Their store is so difficult to figure out what games are that I rarely bother.

Especially when there are so many badass, decently priced places to eat in the metroplex.

Fuck, are we about to have a corn derail?

Don't act like you ain't using that after posting that She Hulk pic.

You can export it as a .f3d file or a .step file and shoot me a link in a PM.

Follow-up because I feel it's important rather than implied. After creating a body or component that is full defined you can use the edges of the shape to define details within that shape as shown below. You just have to make the surface of the body/component as your sketch surface. And an...

You dare compare a Shephard's Pie to a chicken pot pie!? This isn't Stouffer's motherfucker, I WILL KILL YOU!!!

1. Start your sketch. 2. Draw a shape. 3. Choose the measurement tool. 4. Measure from corner to corner or whatever to get your dimensions. Now, with the first shape it's best to go off the dot on the screen, that's how the software figures out a reference point in space for you to start...

I believe constrained is a another word for it, but I'm not 100%. We've always used the phrase "fully defined". You basically want to make sure every single line is measured/referenced off a point of reference that is also defined. Otherwise when you go deep into a model and change something the...

Pecan Lodge and Cattle-lack both only open like 1-3 days a week depending on how long their shit lasts, I've never had them so that would be a good place to start. It can't be as bad as Hard Eight (It's good when it's good, but not consistent). We usually just took people to this place for the...

Just make sure you fully define everything, if not you're in for a bad time with complex models We had an engineer refuse to fully define drawings for 10 years at that CNC company and it completely fucked the company over for about 3 months when they decided to update designs. Digging through...

God damn, how can yall even recommend that abomination of a game?

I haven't read the full list of changes or have seen the blowback yet so hold off on just quitting. Also, once you learn one of them it's very easy to go to something like Solidworks. So it's very worth it to take full advantage of all the videos on Youtube, because Solidworks has jack and shit...

Sad part is they probably just completely imploded Fusion360. Apparently you will no longer be able to save or load files from your desktop and can only use the cloud to complete these functions. It's crazy seeing how good and supportive the company was at the beginning to completely shitting...

Asana is king shit and has automation, my favorite.

https://deskmat.io/

I got my 1mm nozzles in, dialing everything in again.