Search results

Not sure how that is measured. The whole figure is around 50mm from base to head. Edit: Seems Archvillain Games says they should be 32mm figures.

Yea it came out allright, the teeth kinda went missing compared to the CGI reference picture. It's so tiny though I'm not surprised. I think I might scale them up 50% or something in the future. Easier to paint as well. Will check myminifactory. I think I spotted a female demon hunter there...

Printed my first mini just now. Demonskull unit from Archvillain Games. No primer or paint on him, just the grey resin he was printed on. Looked way bigger in chitubox but he is quite tiny.

I was prepared for a few fails of them not sticking but seems I was lucky it just worked. Saw you could use a dry oil on the bottom so it does not sick there. Printing a smaller unit now but the one I really want will take 6.5 hours and no wings included in that. The WH sized one I'm doing now...

Seems to be printing fine so far. It is a bit messy though with resin. Cookie cutter fish test print. These take 30 minutes to print. So a mini will take probably 5 hours?

Got my 3d printer today. Was a bit impatient and started right away to print for a shim for the flex plate. It came out okay but not perfect. It was all default settings and kinda low temp resin as it had been outside an hour earlier. Good enough to get the flexplate installed though. Will...

Horse and base is almost done for now. Was kinda hard getting a greenish blueish tone to the flesh but that is what I could do. Might glaze it a final time with some sort of blue or green hue, or just keep as is. The colors look a lot brighter on photo. It's not quite that blue in person. The...

I looked at the start of this thread for the first time ever and man you have improved miles from that first mini you posted. Great work! Base and lower part is done for now. It's my first build so I won't set too high a bar for myself even if I tend to do just that. The Dark Wash deleted some...

It's started. Looks better in person but it's just base coat so far. Practicing on the base as it's quite detailed.

Le Grill!? whydoesnotminelooklikethat.jpg The paints I ordered got stuck in shipment. Hopefully I can get them tomorrow. Built and primed though, might be a mold line or two left to remove.

I think the biggest thing to get is reading glasses... I can't see shit at close range... maybe @Brahma got tips?! Either that or those LED magnify glasses...

Thanks! Seems Citadel is not selling glaze paint or I can't find any. Thinking of buying a bottle of Vallejo Glaze Medium and just mix my own.

Thanks, what's the difference with inks and paints though?

Yea will probably be just that. :o I just wanted a big model that did not cost a fortune. Lots of out of stock and expensive stuff. And Citadel washes seems to be a good thing to buy. Are glaze the same as washes? All new words to me as I have just used normal paints so far.

Allready got some Vallejos i can try out. Also ordered a few Army Paint to try. Citadel seems good but they cost a lot more to get a good batch of paints. The 3d printer is taking it's time to even be shipped so bought a Warhammer figure to start on. Might not have gone for the easy choice but...

Thanks! Yea the citadel was a bit pricey, but maybe they are thicker and contain more paint? Not sure. @Hateyou Yea I got what you are saying. I lost the flow on painting gunpla for now. I still want to do it but feel like I want to try some hand painting to break the monotony.

Invested 8 bucks into artisan guild patreon for some starter models. Barbarians this month and vampires in January. Now I need to rethink paints, I mostly got airbrush/lacquer paints nowadays. I know I asked before but can't find it. What's a good paint series for brushing minis? I saw Vallejo...

Ended up getting the mars2 pro. The v3 was locked to one software as well for slicing. Got any 3d printed stuff painted that you can show off?

Seems the Mars3 have some z-axis flex. Some hate it and some says it does not affect printing. Will see what I get, the Mars2 Pro is a bit cheaper and will probably be enough for me. Sucks it's xmas and long delivery time right now.

I guess it contained the Yuffie DLC as well, but felt kinda expensive for a PC game.

I never got this on the PS4 as I never play on it anymore. But 85 dorrah for the game on PC here in europe seems a bit steep...

I see some guides tell you to print a spacer for it. Thats not necessary?

Seems you need to adjust z axis somehow when adding one. Or is it not needed on the elegoo?

Thanks! Will see what plates they have. Seems it's updated on the new model though but not sure what quality it is. I've added this so far inte the cart. Might change the mercury to one for half price that is just for curing. (Remove a zero for freedom bucks) This is a plate they carry.

Was looking around today to spend my Xmas money and saw elegoo mars 3 was released recently. 4k and bigger size etc. What would you say is a must accessory to get if decide to order one. You mentioned a better build plate earlier for one. Also what kind of resin is best? Standard, strong...

EU log in times feel a lot better. I don't need to afk to get in. Usually around 100 in queue at 3 pm when I get off work. Goes quickly up after 4pm though.

Starting to get really really bad groupd in leveling and 50-80 dungeons. And its not just sprouts being bad either. Wiped 4 times in Amdapor Hard on 2nd boss and I was just about to rage quit but someone else did it before me so I got no penalty. Yesterdays Trial Roulette was bad as well, like...

Where can I find info on whats the best item to get for each job?

Been slacking on my Reaper once I hit 90 so can't do the raid lol, 561 iLVL only.

Does it end on a cliffhanger or is it it's own story? Supposed to be a trilogy right?

Thanks! Doing okay with BLM but some fights my whole rotation unravels and Eno Chan vanish. It is more mobile though for sure than before. I kinda like it more than summoner so will probably keep going. Did Ninja get a bad start in endwalker? I heard some fc members complaining they did low dmg.

I have always been bad at complicated gameplay. I played Dancer last expansion due to it being simple as "press glowy buttons". It was pretty shitty damage though, not that I'm an end raider or anything but I like to see I'm doing well in the groups damage wise. Summoner feels almost as simple...

The trials are at 83, 89 and 90 MSQ level. Just like ShB I think.

Tried out Summoner today. Not sure what to level next between SMN and BLM but the mobility of SMN is crazy now. I really like BLM but the long cast times and busy fights can be annoying.

What ever happened to the data center visit? Would that not solve a bit of congestion? If I could visit a NA server on my prime time I would not have any queues. I made a character on Bahamut just in case if I wanted to play and could not access my EU character. Bought an MSQ skip but have not...

The "game" is outdated right now by todays standards. It will be even more outdated if it even releases. Who will play this? A hundred 40-50 year olds won't finance it. But this has been said over and over allready. I believe you are just trolling for the fun and thats great, pretty much what...

Not sure what to do now after MSQ. I'm too old to raid Savage modes. I would like to do the extreme for weapons but not sure if I'll manage. I did down Titania Extreme back in ShB. Might just farm some tome gears and wait for the normal raids and then take a break until the next content patch...

Been playing all weekend and about to enter the 6th zone. The story is great but I feel some people are hyping it a bit too much in the comments. The trials feel really hard though or it might just be me being overwhelmed playing a melee this time around. The role quest sucked though, I...