Home Improvement

Hoss

Make America's Team Great Again
<Gold Donor>
28,601
18,952
Lucky, the posts I dug up for a fence repair and overhang supports were all rotted from the bottom up basically. The concrete basically just held the remains of a rotted post that flaked apart at a touch.

I have / had some terrible drainage in the yard and termites prior to replacing those though.
I think the concrete itself causes rot too.
 

Kajiimagi

<Aristocrat╭ರ_•́>
3,186
5,932
I think the concrete itself causes rot too.
back in the day, I did a nursing home and the locals used black mastic (looked like roofing tar ) to put on any metal items that were going to penetrate the slab. I was putting rigid metal conduit in the slab but they insisted the concrete would rot the conduit. I have no idea if that is correct or not.
 

Lanx

<Prior Amod>
69,886
162,822
100%, Steel is 95% of my fence aside from the part that the "DIY guy" who owned this place before us decided he could handle even though he couldn't even handle the mailbox that is sitting at a pretty good angle.

I mean, the reality is that setting posts in the ground will outlast most of us here. I dunno, it just seems shitty to set someone else up for failure knowing that it'll be nicer for longer if I spend like...what...10 to 100 dollars more (depending entirely on the project of course).
haha, yea when my mailbox almost tipped over and i found the rot, i went and got this anchor
016e5af72f9a55dbef5b594c89676c07.png


and a new 4x4 and i was up and running in no time, didn't have to dig weird or pour concrete.

of course in super hindsight

what i did was wrong, b/c my mailbox is right next to the culdesac transformer, but i ain't crispy yet!
 
  • 1Like
  • 1Worf
Reactions: 1 users

Control

Bronze Baronet of the Realm
4,077
11,031
haha, yea when my mailbox almost tipped over and i found the rot, i went and got this anchor
016e5af72f9a55dbef5b594c89676c07.png


and a new 4x4 and i was up and running in no time, didn't have to dig weird or pour concrete.

of course in super hindsight

what i did was wrong, b/c my mailbox is right next to the culdesac transformer, but i ain't crispy yet!
Well, digging a bigass hole with a shovel seems more likely to fry you than your screw post.
I got the spikey (instead of screwy) version of that for a few panels of fence/trellis. Wasn't really thrilled with the sturdiness, but it hasn't moved yet. Although with that in mind, I made the stupid thing in a U shape, so it probably would have been fine just throwing it on the ground.
 
  • 1Solidarity
Reactions: 1 user

GuardianX

Perpetually Pessimistic
<Bronze Donator>
7,592
19,607
haha, yea when my mailbox almost tipped over and i found the rot, i went and got this anchor
016e5af72f9a55dbef5b594c89676c07.png


and a new 4x4 and i was up and running in no time, didn't have to dig weird or pour concrete.

of course in super hindsight

what i did was wrong, b/c my mailbox is right next to the culdesac transformer, but i ain't crispy yet!

I did like control and got the spike version of that to do my mailbox...I warped the top and the "Stake" when it hit somethign hard about 2 feet~ in. I gotta extract it now because it's useless as is, the post is like 6 inches off the ground and the metal bracket is warped.

Who knows, I may just use it for now, I dunno...it looks janky as heck.
 

Control

Bronze Baronet of the Realm
4,077
11,031
I did like control and got the spike version of that to do my mailbox...I warped the top and the "Stake" when it hit somethign hard about 2 feet~ in. I gotta extract it now because it's useless as is, the post is like 6 inches off the ground and the metal bracket is warped.

Who knows, I may just use it for now, I dunno...it looks janky as heck.
Yeah, very rocky/clay-y ground here, so it made it hard to get them sunk exactly where I wanted and square. But digging wasn't going to be much fun for the same reasons. I don't think they ended up adding all that much "stick this to the ground" or "keep this from falling over" force, at least if it were a single post. Since the fence is more of a box shape, it seems a bit more like building a shed and attaching it to footers, it keeps it stable laterally at least. Not sure I would trust them for a straight fence more than waist high though, at least without some perpendicular supports. Probably ok for a mailbox though, and the screwy ones look like they'd be better than what I used. I don't know dick about fences though, so I was just winging it.
 

Deathwing

<Bronze Donator>
17,298
8,280
whoo whoo here's a couple pics of the worst damage. Sorry for the poor angle, ladder doesn't go any higher, which might be an issue for repair.
 

Attachments

  • PXL_20250526_201530796.jpg
    PXL_20250526_201530796.jpg
    1 MB · Views: 22
  • PXL_20250526_201521694.jpg
    PXL_20250526_201521694.jpg
    1.1 MB · Views: 22

whoo

<Silver Donator>
1,707
6,975
whoo whoo here's a couple pics of the worst damage. Sorry for the poor angle, ladder doesn't go any higher, which might be an issue for repair.
Looks like moss grew on it and over time weakened the block. This is repairable. I would use Hydraulic Cement. You can get it at the home center. Hydraulic cement is thick, stays put on vertical surfaces, and expands slightly as it cures.

Scrape out any moss thats still there. Remove any very loose debris from the holes. Mix up some cement according to the instructions on the package. Glob it into the holes and let it set. It sets in 5 minutes so work in small batches with a helper who can mix up a bit and send it up the ladder to you.

 
  • 1Like
Reactions: 1 user

Deathwing

<Bronze Donator>
17,298
8,280
Looks like moss grew on it and over time weakened the block. This is repairable. I would use Hydraulic Cement. You can get it at the home center. Hydraulic cement is thick, stays put on vertical surfaces, and expands slightly as it cures.

Scrape out any moss thats still there. Remove any very loose debris from the holes. Mix up some cement according to the instructions on the package. Glob it into the holes and let it set. It sets in 5 minutes so work in small batches with a helper who can mix up a bit and send it up the ladder to you.

Thanks for the advice. I've used hydraulic cement to patch cracks in my porch, much smaller volume. So I could not concern myself with the mixing vessel(some cleaned plastic recyclable or can) itself setting up quickly. How do you deal with this in a larger volume? Just set aside lots of cans for mixing one batch at a time?
 

whoo

<Silver Donator>
1,707
6,975
Thanks for the advice. I've used hydraulic cement to patch cracks in my porch, much smaller volume. So I could not concern myself with the mixing vessel(some cleaned plastic recyclable or can) itself setting up quickly. How do you deal with this in a larger volume? Just set aside lots of cans for mixing one batch at a time?

I just mix it in a plastic paint bucket. I think its like 32oz / 750ml? The cement comes out and i just reuse it. You can get 3 of those for a few bucks and rotate through.

If you have a helper, you can use an old paint bucket with a handle. Have them mix and attach it to a rope. Pull it up, squish it in, and send the bucket down, rinse repeat!
 

Goatface

Naxxramas 1.0 Raider
10,603
17,940
whoo whoo here's a couple pics of the worst damage. Sorry for the poor angle, ladder doesn't go any higher, which might be an issue for repair.

pretty sure that is water damage from the mortar not being able to weep moisture away. blocks are fairly permeable, so water travels to the bottom and collects on the mortar. would probably reseal the crown (special paint like stuff) and if not going to use it cover it with a cap. don't know if can buy a cap to close it off. remember few years ago my neighbor couldn't find one so he just built one out of treated wood and covered it with singles, so it looks like a little roof.

i have never built a chimney, but torn down several and that is what i have been told causes most of the damage like that.

edit found a pic of it, about 10 years ago we were talking about it one day the next was on his roof installing it. he was mid 80's at the time.
1748356650937.png
 
Last edited:

Deathwing

<Bronze Donator>
17,298
8,280
The chimney is capped. Though I don't know to what degree. I'm fairly ignorant here. It looks like the standard "lets smoke out and keeps some water from getting in".

I paint my porch with that stuff that keeps water out, should I use the same stuff on the top few layers of cinder blocks of the chimney?
 

Aazrael

Avatar of War Slayer
4,035
15,989
After they shut down the factory I work at I decided to "borrow" as much material as I could from there before they close the doors. My boss does not give a fuck anymore and just said "take what you need" lol.

So I stuffed some 2x4s into the car and decided to start building a wall leaning green house for the GF. Had some old windows from a co-worker that I'm building around.

I'm no woodworker and I take lots of shortcuts but it usally looks decent enough when I'm done.

Started assembly today and coated it with 1 coat of oil as a base. Will be painted white when it's done.

Day 0
494575138_1430111158428591_3827970489115776462_n.jpg


Day 1
496511225_1216812373282201_4094645204051295049_n.jpg
 
  • 6Like
Reactions: 5 users

Sludig

Potato del Grande
10,524
11,325
Dont know which thread remotely would have people for it. Seems up Lanx Lanx ally. Got guests coming over in a few weeks and I'm always overly self conscious I guess you would say worrying about how the house smells with several big dogs and unlike CO, very wet so yeah, especially the "mud room" with the kennels has some smell. Also finishing a batch of chicks in a brooder and when they are getting decent sized that also has a little funk.

A few rooms I might ozone, otherwise good windows open airing out, might get carpet smelly powder you vacuum up. But anyone know of any good ways of spritzing up the house without it just being crazy amounts of febreeze that then just smells like you febreezed. Half debated just loading up on smelly dollar tree mopping soaps etc and go full mexican cleaning crew.
 

Kobayashi

Bronze Baronet of the Realm
1,090
3,154
Dont know which thread remotely would have people for it. Seems up Lanx Lanx ally. Got guests coming over in a few weeks and I'm always overly self conscious I guess you would say worrying about how the house smells with several big dogs and unlike CO, very wet so yeah, especially the "mud room" with the kennels has some smell. Also finishing a batch of chicks in a brooder and when they are getting decent sized that also has a little funk.

A few rooms I might ozone, otherwise good windows open airing out, might get carpet smelly powder you vacuum up. But anyone know of any good ways of spritzing up the house without it just being crazy amounts of febreeze that then just smells like you febreezed. Half debated just loading up on smelly dollar tree mopping soaps etc and go full mexican cleaning crew.

They make a Febreze without the godawful perfume. Don't ask me why, but it's an absolute pain in the ass to find in stores.


I think I had to buy it online - I think I used Target since that's something I don't want a knock off of. That said, I don't use it very often - usually just as a last resort, there was some data that came out showing that chemical isn't the greatest health-wise. Baking soda does a pretty good job - you can spread it on carpets and whatnot and then vacuum it up. It's probably the active ingredient in the carpet smelly powder and you don't get whatever extra bullshit that comes along with that.

Hepa filters can help some if you get ones that have an activated charcoal region. Winix isn't bad, but I usually wait for a sale. I used to like Asept Air, but their filters are impossible to get now. You can also get activated charcoal bags - they help some but I find them a little more limited than something with some airflow circulating air in the room.


Lastly, if you do want to mask the smell, I like to use a diffuser and a drop of an essential oil - I like citrus. Nice thing is you can dillute easily so the smell isn't overpowering.
 
  • 1Like
Reactions: 1 user

Lanx

<Prior Amod>
69,886
162,822
Dont know which thread remotely would have people for it. Seems up Lanx Lanx ally. Got guests coming over in a few weeks and I'm always overly self conscious I guess you would say worrying about how the house smells with several big dogs and unlike CO, very wet so yeah, especially the "mud room" with the kennels has some smell. Also finishing a batch of chicks in a brooder and when they are getting decent sized that also has a little funk.

A few rooms I might ozone, otherwise good windows open airing out, might get carpet smelly powder you vacuum up. But anyone know of any good ways of spritzing up the house without it just being crazy amounts of febreeze that then just smells like you febreezed. Half debated just loading up on smelly dollar tree mopping soaps etc and go full mexican cleaning crew.
i think theres only two ways to "absorb" odor and thats w/ charcoal and/or baking soda

get a few of these and put one in each room, it's $1 (i put 1 at each door, that way i also know where i put it, instead of stashing it in a corner and forgetting for a year, if youre super cheap you can just buy the flow thru box once and just fill it up w/ new bulk baking soda, or use something porus like coffee filter material)
4d5d36cfb141bc2e988358d18f250f02.png


you can of course "mask" the odor thats where febreeze comes in, it's mostly just perfume, right?

then kill the odor (odor cause by bacteria), ozone

those sprays that attack bateria, especially since you have pets, get a black light and go to town

"natural" home remedy for a funky area is citrus/vinegar/baking soda, that should neutralize any problem area

and if you live like a vampire, open all your shades, sunlight is also a disinfectant
 
  • 1Like
Reactions: 1 user

Aazrael

Avatar of War Slayer
4,035
15,989
Started painting and wouldn't you know, it starts to rain out of nowhere...

Will be fun to see how much paint is left tomorrow. :p Will be painted another coat then I'll hang the windows.

Not sure how to solve the roofing. Going to add 4 more supports on the roof but they might be a bit thin as they are now, used some old off-cuts. Might need to go and get some that are double the thickness if it feels too flimsy. Will be adding a metal sheet roof that I have saved for years.


Day 2
picture3.JPG