Beautiful! I hope to be at that level one day! I applaud you sir! What is it for? Mine was just for a pump and a 110 temp controller.I have wired a few panels myself
Things you enjoy to do at work or at home..
- Thread starter Dookiefart
- Start date
Who the fuck uses rainbow themes on their browser? Gay.. and inefficient.I enjoy browsing porn, both at home and at work.
I love music but don't play. your setup looks awesome though!First thing I hit up when I get home from work. Even before visiting this site.
I built the strat-style guitar. Started with an unfinished fretted neck and a finished body.
- 50,966
- 247,787
I was kinda born into it. I have a family (large extended family, too) who all does it. And I tend to keep things simple - I don't do much with the lathe. I prefer the Shaker style - square and light, which is different than the mission style, which is square, but much heavier in feel. I do a lot of hand work with chisels, and I use a router a lot. Biscuit joiner, and a lot of different kinds of sanders - pedestal sander for smaller work is my preference. I keep things pretty simple.
Borzak
Silver Baron of the Realm
- 26,622
- 35,433
I like building/making stuff. Built my last few houses except for my current one.
Right now I'm about 3/4 of the way thru building my own teardrop camper that I use as a basecamp while taking multi week backpacking trips. Eventually it will be covered in aluminum, have a tongue box with an A/C unit, and fenders. Right now I'm working on the rear hatch that opens up the kitchen area in the rear. The actual camper part is 9'-6" long and 5' wide and 4' tall. The inside front part for the bed is 76" on the floor and a 1' cabinet at the front. The rest is under the back hatch in the kitchen.
Right now I'm about 3/4 of the way thru building my own teardrop camper that I use as a basecamp while taking multi week backpacking trips. Eventually it will be covered in aluminum, have a tongue box with an A/C unit, and fenders. Right now I'm working on the rear hatch that opens up the kitchen area in the rear. The actual camper part is 9'-6" long and 5' wide and 4' tall. The inside front part for the bed is 76" on the floor and a 1' cabinet at the front. The rest is under the back hatch in the kitchen.
I like building/making stuff. Built my last few houses except for my current one.
Right now I'm about 3/4 of the way thru building my own teardrop camper that I use as a basecamp while taking multi week backpacking trips. Eventually it will be covered in aluminum, have a tongue box with an A/C unit, and fenders. Right now I'm working on the rear hatch that opens up the kitchen area in the rear. The actual camper part is 9'-6" long and 5' wide and 4' tall. The inside front part for the bed is 76" on the floor and a 1' cabinet at the front. The rest is under the back hatch in the kitchen.
*slow clap* that shit is bad ass dude!!! please keep us updated! or give some pics of your older work? I live in an apartment so I live though others! Only craft time I have is at my job on or off the clock...
Borzak
Silver Baron of the Realm
- 26,622
- 35,433
I had another one before this one that I posted pics over at the old FoH. I'm not sure what happened to them. It was a squared off design with no curves.
I also build and fly giant scale R/C planes between 25% and 42% scale of a full size plane. Here is one I had in the shop a while back right before I moved, need to get started on it again and finish it up. This one has a wingspan of 96" and is powered by an 80cc gas engine. For size reference it's sitting on a house door.
This is a gunstock I'm working on. I duplicated it using a DRO on a mill from a stock I already had. I still need to inlet it for the action/barrel and finish it etc...
I also build and fly giant scale R/C planes between 25% and 42% scale of a full size plane. Here is one I had in the shop a while back right before I moved, need to get started on it again and finish it up. This one has a wingspan of 96" and is powered by an 80cc gas engine. For size reference it's sitting on a house door.
This is a gunstock I'm working on. I duplicated it using a DRO on a mill from a stock I already had. I still need to inlet it for the action/barrel and finish it etc...
Zehnpai
Molten Core Raider
- 400
- 1,246
- 50,966
- 247,787
I don't have any pictures handy, but I should! I'll find some and post them.
- 50,966
- 247,787
It can be a blessing and a curse. My house is both - I love having things to work on, I'm getting tired of it. This house was a repossessed crackhouse, so every floor, wall, and ceiling needed redoing. I have only a bathroom and a kitchen left. Then I'll be able to get back to making furniture.