Search results

I did some reading on the subject and I thought it would be better to use a soft net rather than my hands. I kept the little guy in the water and my wife was getting ready to retrieve the hook when it popped out of his mouth, so we never had to touch him at all. I know it won't always be that...

Our first fish. My wife caught this guy/gal (?) in the Big Wood River near Ketchum, ID. It measured about 10.5". We took the photo and released it back into the river

We covered this once before a few years ago. Put a few tbsp. of oil down the drain. It will float on the water in the trap and prevent it from evaporating.

Do you have a toilet nearby?

I think we're talking about two different procedures. You don't sleep through one of them.

.

Yes Later this year. It will be a 2019.

This is what I want, now.

Why not just incinerate it?

You could try, over a long period of time and using a walk-behind spreader, to add small amounts of soil or sand to your existing lawn. Lightly raking it after will knock the soil off the peaks and fill the valleys. You have to do this many times. It's a slow process and can take months.

I have a mesh jacket for when it's really hot. It doesn't offer all the protection a full jacket offers but it does have elbow, shoulder and back pads. The great thing about it is that it lets air pass through it and in low humidity conditions like in AZ, you can wear a vest under it that has...

I've done both metal and vinyl gutter installations on my homes over the years. Neither is as good as you will get by having a seamless guy come out and do it. Way too many joints when you DIY and each one will eventually leak because of the excursions the product will go through as it gets cold...

Not if we kill them first.

Lol. I smash the barbs down because I want to release the fish with minimal damage.

Would you put bait on those? Also, I've been smashing the barbs down with pliers just in case.

So this might sound a little silly, but here goes. When my wife and I go camping sometimes we fish a stream or river just to use up time. We would release anything we caught. I say would because we've never caught anything. We are incompetent noobs. We have a collapsible rod. It needs to be...

First Bond Girl Dead at 90 Also, the ex-printer in me notices the incorrect usage of "you're" in the article. We used to have proofreaders on staff.

Who do you pay the fine to? Because I'm not so sure those guys have the authority to enforce that ticket. That parking lot is private property and those guys are private security. If you don't pay there may be fuck all they can do about it. Then again, I might be wrong.

A sealer will not prevent mildew or mold. Good ventilation will. Put your fart fan on a timer and turn it on before you shower and have it run 10 minutes or so after your done.

What were you expecting it to do? A good sealer, properly and consistently applied (yes, it won't last forever) will keep most liquids from penetrating the surface of the stone or grout. It will not prevent dirt, soap scum or hard water deposits from forming on the surface. If the grout darkens...

"doggy dog world" lol

I hate the wave. Keep your mind on what you’re doing, not on some ritual because some random fucktard thinks he’s your bro. If you must, nod your head but keep your hands on the bars. If you don’t wave back, he’ll get over it.

Our local Costco has a Spanish cheese called Manchego. Give it a try if you have access.

I guess it’s a mindset. I enjoy learning how to do stuff like that. Many times I finish a job and say I’ll never do that again but I know I could and that gives me satisfaction.

You start by watching other people do stuff, like this video. Or you observe how something was done and repeat it. You ask questions. Will your first ramp be as nice as his? Probably not, but your second one will be damn close. As far as tools are concerned, you could built that ramp with a...

Overweight people who wear football jerseys and long shorts. It's not muscle, dude, you're fuckin' fat.

Can't say I've ever seen it done that way. Many good lucks.

All stair risers have to be the same. It’s safer, easier and usually code. So determine the height and set all of them first. Plumb. Use a level. Then using the edge of the tile that is the riser as a edge, screed or fill in the platform behind the riser with thinset or dry pack. Use a level...

If the floor has that many irregularities in it, level it. It’s not that much work to screed some thinset over it with a metal straight edge. Then you can use the proper notched trowel and not have to lift tiles so often to level your work.

Why didn't you buy a stone that was already cut into a pattern? There are tons that come in a Versailles or Lyon or whatever 3 or 4 piece pattern.

If I had one, I surely would use it as a plus when showing my house and I think most folks would be receptive. As a buyer, and I'm speaking for myself, YMMV, I consider them a negative and here's why. 1)The filters are expensive and proprietary. 2) They consume a lot of water and in some...

It was "cload" on a TRS-80. That worked on a cassette or a stringy-floppy.

And then, because I needed to bring my work home (the Model 3s I had did estimating and the books for my business) I bought a TRS-80 4p, the p was for portable. It was actually about the size of a piece of carry on luggage, but it was portable. About that time, IBM introduced the PC but I...

Get some real gear and wear it. Always wear a helmet. Don't do the cruiser thing and get some cheap ass helmet because it looks cool or some "assless" chaps because all the other cruisers out there wear them. That silly shit the loud pipe gang wears is mostly worthless.

Fuckin' kids. Ever play Zork on a TRS-80 Mod 3? My first computer, a Model 1, loaded from a cassette and Zork only came on a 5 1/4" floppy. Not even my stringy-floppy would work. I had to upgrade.

^ That turned out to be the last photo I took of Max. I had to put him down last week. Fuck cancer.