Search results

once it is out, word of mouth will go for the success thing , see BvS dawn of justice- while Successful world wide- in the US, it -relatively- Tanked for such a huge movie so if it follows BvS- largish first weekend then a 70% drop or so 2nd weekend then gone in 4-5 weeks.......

i caught amanchu -was decent. i'll watch a few more servamp- was ok. Aldermin- i liked as well. 2nd episode of Days was good also

won't -or shouldn't happen until season 3 most likely. looking at the episodes and the manga, season 1 got to around issue 60 of the manga.. she learns about souma Eventually,

Re: Honor Harrison I Believe there are only 1 or 2 books left in the initial Honorverse series timeline. next book is to be published in November (which means i'll read it in august/sept whenver the arc comes out) rumor has it at around 800 pages. webers next safehold book is almost done...

anyone watch Kuromurkuro on netflix or any other sites? i was bored last night and turned neflix on to see if anything good was avail (or i was going to watch the rest of Lethal Weapon) and saw that and went Hmm.. Liked it alot. (binged 6 episodes before bed)

unless the colts have a qb that is equiv to luck on the roster, no way they let him go, a quality QB makes everyone on the offense better, an average qb doesn't. that is why so many teams with great players -not QB- go nowhere in the playoffs (most of the time- there is the occasional great...

I watched the first episode of: Days, Fukigen & hatsukoi days gave me a sort of baby steps vibe- just soccer fukigen looked ok, hatsukoi- was ok, just didn't click to me will be watching more new stuff shortly. side note: one chinese light novel bit i would like to see made into...

As a land surveyor/civil engineer who does a lot of water/sewer/drainage design, a sch40 designation is always followed by pvc- used for drainage or force main sewers. Same as sdr35 pvc which is for sewerage. Copper pipe is type k copper for water/fire services, dicl/cldi is either cl52 or cl56...

rofl. a weed farm?

no worries had to go out for ~hr to get my new deck boards delivered 31 20' boards- those will go up next week after the 4th, then stain/paint

ya reading the readme ya, cuz it goes, creates a temporary tin...shrug no idea if you want you can shoot me over those lidar text files and i will look at the text file to see if i could just import straight and then i could dxf the resultant file. or you could cut and past a couple of lines...

looking at lastools you using las2dem? never used this but let me see if i got this right... no idea if this is right so bear with me from reading this bit in the read me: las2dem -i lidar1.txt -i lidar2.txt -iparse xyz -o dem.jpg -hillshade -last_only creates a temporary TIN from...

looking at qgis & lastools .tin is a file type - my autocad topo files are - caveat i use autodesk's land development desktop 2006 since we have had no need or desire to upgrade our cad system -paid one price, have it installed on cough cough 1 system cough cough....until the city of boston...

Personally never did a comic-con - yet. My kids wanna go to one and/or pax east i did do EQ fan fests - boston's vegas and one other. and i did do gen con twice back in the 1980's..had fun. met hickman, weis, gygax and others. looking forward to the movie. looks good at least so far.

One thing i noticed with pix4d the few times i used it, there is your flyover box, then inside the box is a circle, that circle is where you get the highest level of detail/focus of the flyover,(well that and the first few times i tested, when i got the initial sketch from the cloud, the focus...

Buying the fast pass plus for cedarpoint that way we can be those Dicks that skip most of the line. ....trip planned except for 2 nights that we are not sure how far we are getting reservations made for all the main stops- day 1 - stopping somewhere between rochester and buffalo, then 2 nights...

1. good question, no idea personally i try to keep all the files under 30 meg total. let me look it up, give me a couple of minutes 2. no idea

grats on the comment about selling, that thing about being 6 feet off..other drone guys obviously were not as ...meticulous in their preparation as to how to run it right. btw so his topo he got from you.. everything is checking to under 5 INCHES (0.42 feet is 5 inches)(most likely...

if you guys use/used B&N for ebook purchases, you probably/might have a balance now due to the apple settlement payout (again). B&N just tossed 113 bucks into my B&N account due to this-

ya lidar is better-goes thru tree leaf cover, but the unit is pretty dang expensive. the velodyne lidar "puck" is 8k. routescene is another company doing drone setups..they use velodyne lidar products in their "pod" told you it would be fine bandwagon. fitting tight to me = they...

those properties sell themselves, heart of boston, near the hospitals etc about a 10 minute walk to the charles i'm more into the photogrammetry aspect of the drone (taking pictures to get topography)

so now all a drone operator needs to do is pass a operators test vs having a pilot's license.. very nice. i'll be looking into taking the test in the next year. problem with my company is we are so busy, with all small sites(last job we did was a 2000 sq ft lot- the brownstone sold for 2.4...

BURREN one of the latest arch styles for deck railing is the wired style, either vertically or horizontally like what lurker did. i considered it but did not go that route. it looks good. my deck project is on pause while the damn deck boards are - apparently- backordered/out of stock ...

Looks decent. loved the first one but sort of wish they had gone more for the animated look/style for the dragon like the original.

just be careful lurking...fucking conservation agents/epa might get up in your ass about building one. esp if you use an existing brook/stream to help form it

framing is 2x8. posts are 4x4 pt. i think he is going to notch a 2x8 mortice similar to all the other posts on the deck, they all- except for the replaced one- have the joint cut and then to the inside- so outside 2x8 is flush with the 4x4. and the inside 2x8 is in the mortice as a tenon my...

just waiting on the decking then we can finalize the rebuild of my deck. contractor goofed and had to cut the addition by 6" so that the overall frame was 19'10" so we could use 20' boards, he had goofed and made it 20'4". images pre build as you can see the decking is in sorry shape...

I Watched the first episode, it was ok. will watch the rest when i have time.

ya 1200 sf is nothing.. like what 50x24 technically you COULD do it automatically just not really worth the hassle it would be to set up correctly. plus if something goes wrong... you have power? can run some ethernet cable? get somethign like monoprice's 4 camera setup for 245, then...

ROFL A good check is... the inbetween stuff roadway width check (should be an inch or two) the bridges the distances between the buildings etc. if your control points are good (and you made them good) and you have a decent triangle setup of control points (that way you get n-s and...

phoenix, cinder block... can you lose said 3" or so? (if you could lose 5. can slide in r13 insulation., you need some insulation-not to keep the heat in, but to keep the heat out. since north facing walls get the most sun... alternatively...plantings outside to shade the wall? shade= no...

everyone has the same "Basic" equality opportunity in the US, what they DO with that is the difference. some of it is education, some of it is living environment, but most of it is.. each individual's drive -effort- desire. that effort would reflect into the other aspects for the opportunity-...

so what is that wall made up phoenix? if a hollow core/sheetrock and wood style...put a hole in each hollow between the framing and get some polyfill to blow in... if a solid type wall, could you stand to lose ~3 inches of room? frame a fake wall inside the wall with 2x4's glued/nailed...

no that is good., you forced the distance because that is what it was supposed to be now THEY need to go out and ...check the limits of your flyover to see if the distance from say near the nw corner of the northwesterly most house to the bridge on the se side road is also within acceptable...

NO worries, the only thing - for YOU to worry about is the control points the surveyor lays down- that is his "control tie" between what he does in cad. and what YOU do in whatever program you use to convert into a 3d mesh (or whatever you are giving him) because the surveyor will know that...

It all depends on the contractor. i know contractors that cut corners ALL the time- we try to avoid working with them i know a contractor that does such quality of work that he gives 10 year warranties on the construction that contractor is now looking for another gut job in boston..he...

oh ya happy birthday a bit late, my 50th (ugh) is 2 weeks from friday it is just precision/accuracy.. how precise the survey is. for survey it is error of closure - usually it is our survey traverse and the ties to the control points are determine precision/accuracy- the control lines and...

TENTH vertical or horizontal? if vertical, awesome, Significantly more precise than a normal topographic survey would get-mainly due to the "coverage" of the topo. a survey that large would get -along the road, MAYBE 1 shot every 30 feet plus any structures signs etc, with the pictures, it is...

Damn........... sweet. edit: what was the ultimate accuracy you got for the map? looking at it, horizontally looks good to me- but not knowing the record distance from "point a to point b" i have no idea how close to that you got. we term accuracy/precision in terms of error acceptable...

Oh hey floating planks. Way easier. I did my bathroom with a "floating" plank style 12" tile 12 years ago, still looks great. After the first row is in and squared correctly, except for cut pieces, rest of the floor(whole planks) goes down in like 10-20 minutes maybe a bit longer if room large.