Car ?'s

Kajiimagi

<Aristocrat╭ರ_•́>
6,804
11,460
Wouldn't the three different vendors part have to fit the same spot in the car though? Shouldn't they be compatible? How can they have 3 different starters that aren't compatible but fit the same model of car?
no fucking idea bro. I'm only repeating what I was told, asked the same question in fact. GM is about half a shit show anyhow. Always has been.
 
  • 1Worf
Reactions: 1 user

Kajiimagi

<Aristocrat╭ರ_•́>
6,804
11,460
OE parts are always best, but aren't 100% necessary in every case (depends on the area of the car/truck, obviously) and you'll save a ton by using aftermarket.
My Tundra that I loved sadly ate rotors like they were tic-tacs. I had to drive from 2K ft up to 5.6k ft and down to 2K ft every day to get to Vegas. Rotors would get so bad when I braked the front would shudder. Replaced the brakes and rotors with aftermarket racing ceramic pads and cross drilled ceramic rotors. Cost was about twice the regular OEM parts and I had to break them in first which I was only able to do cuz I lived in nowhere but I never had a problem again. For the most part, I use OEM - or I pay someone to use OEM.
Also ---really hope I'm wrong but it looked like my wife's car is leaking oil. Did I mention I hated it? I'll know Monday for sure as I have something clean under it to check for drips.
 

BrutulTM

Good, bad, I'm the guy with the gun.
<Silver Donator>
16,609
1,384
For the most part, I use OEM - or I pay someone to use OEM.
Not saying OEM parts are a bad idea, but mechanics that insist on OEM parts have a financial incentive to do so. They mark up parts based on what they cost to begin with, so more expensive parts = more money in the mechanic's pocket without them having to do anything. I think this trickles down from the parts stores as well. Most of their business is selling parts to mechanics, and if their parts cost more, both them and their customers (mechanics) make more money and pass the bill along to you.
 

Kirun

Buzzfeed Editor
22,193
19,783
Not saying OEM parts are a bad idea, but mechanics that insist on OEM parts have a financial incentive to do so. They mark up parts based on what they cost to begin with, so more expensive parts = more money in the mechanic's pocket without them having to do anything. I think this trickles down from the parts stores as well. Most of their business is selling parts to mechanics, and if their parts cost more, both them and their customers (mechanics) make more money and pass the bill along to you.
Mostly false.

OEM parts markup at a dealership is actually very minimal (except on shit that is already cheap - like gaskets, clips, etc. But stuff like alternators, engines, etc.? Yeah, those markups are really small). They make their money on labor and "upselling" you services you don't really need or are easily done yourself - which they then get to sell you MORE labor on.

The reason Bob's Mechanic shop charges out the ass for OEM parts is because it's harder/more expensive for him to get supplied with OEM parts than the dealership. But Bob's Mechanic shop is using the SAME parts/labor formula recommended by the manufacturer as the dealership is, I promise you - they virtually all use the same software when calculating that stuff.
 

BrutulTM

Good, bad, I'm the guy with the gun.
<Silver Donator>
16,609
1,384
If it's so small, try showing up to your mechanic with the parts you bought online and see how happy they are about that.

Here's what Gemini says...

1. The Parts Matrix (Sliding Scale)​

Most independent shops and dealerships use a sliding-scale parts matrix built into their shop management software. Instead of applying one flat percentage to everything, the markup percentage decreases as the cost of the part goes up.

  • Low-cost items ($1 – $10): Might be marked up 100% to 300%+ (e.g., a $2 drain plug washer or bulb billed at $6–$8) because the administrative time to order, receive, and stock a small part costs more than the part itself.
  • Mid-range parts ($50 – $250): Typically marked up 50% to 100% (e.g., an alternator bought at wholesale for $150 might be billed to the customer at $250–$300).
  • High-cost components ($1,000+): Often marked up 20% to 40% (e.g., a transmission or engine assembly) so the final bill stays competitive and doesn't price the customer out of the repair.
 

Kajiimagi

<Aristocrat╭ರ_•́>
6,804
11,460
Mostly false.

OEM parts markup at a dealership is actually very minimal (except on shit that is already cheap - like gaskets, clips, etc. But stuff like alternators, engines, etc.? Yeah, those markups are really small). They make their money on labor and "upselling" you services you don't really need or are easily done yourself - which they then get to sell you MORE labor on.

The reason Bob's Mechanic shop charges out the ass for OEM parts is because it's harder/more expensive for him to get supplied with OEM parts than the dealership. But Bob's Mechanic shop is using the SAME parts/labor formula recommended by the manufacturer as the dealership is, I promise you - they virtually all use the same software when calculating that stuff.
Approaching this from a different angle. Does the mechanic (the one doing the actual work in a larger shop) still get paid a flat rate based on a labor/cost book? I.e. if the book says a brake job should take an hour and the labor rate is $100 you get that if you do it in 10 minutes or 5 hours? When I got out of high school I was looking at a school that did a double ASE cert in gas and diesel and it was explained like that. That BS plus not wanting to be greasy was why I got into construction.
 

Fucker

Log Wizard
17,716
43,845
If it's so small, try showing up to your mechanic with the parts you bought online and see how happy they are about that.

Here's what Gemini says...
That is 100% about liability. No one is going to put parts on of unknown quality. Could be Chinese trash that is broken and new, or used and broken, or any number of things. They don't want to deal with the parts, and they don't want to deal with the customer that brought them in.

My shop will put on parts that I bought because they know me, know I will buy the right thing the first time, buy quality, and agree that labor is on me if they are defective.
 

BrutulTM

Good, bad, I'm the guy with the gun.
<Silver Donator>
16,609
1,384
That is 100% about liability. No one is going to put parts on of unknown quality. Could be Chinese trash that is broken and new, or used and broken, or any number of things. They don't want to deal with the parts, and they don't want to deal with the customer that brought them in.

My shop will put on parts that I bought because they know me, know I will buy the right thing the first time, buy quality, and agree that labor is on me if they are defective.
My buddy will put on parts that I bring him too, but it's as a favor to me because he makes less money because of it. You can show up with high end performance parts and they can check the part numbers. They won't like it because you're asking them to do it at a discount. I really wish they would just charge by the hour and give you the parts at their cost but that's not how it works.
 

Kirun

Buzzfeed Editor
22,193
19,783
If it's so small, try showing up to your mechanic with the parts you bought online and see how happy they are about that.

Here's what Gemini says...
You're conflating two entirely different arguments. A shop not wanting to install customer-supplied parts has absolutely nothing to do with the size of the markup they're applying to parts they source themselves. That's a liability, warranty, and profit-margin issue. If I bring you an alternator I bought online and it turns out to be defective, you're now stuck dealing with the labor, the customer, and the inconvenience of a part you didn't supply. That's a perfectly reasonable business decision, but it doesn't establish anything about OEM parts markup.

And I'm not sure why we're treating Gemini's generic parts markup estimates as some sort of authoritative industry data. A 50-100% markup on a midrange part might be perfectly representative of some independent shops, but that doesn't mean it's representative of dealership OEM pricing. You're lumping together independent shops buying through aftermarket distributors, independent shops sourcing OEM parts, and franchised dealerships buying directly through manufacturer distribution channels. Those are three different supply chains with different acquisition costs and pricing structures.

My original point was that dealerships generally have a significant advantage when sourcing OEM parts because they're buying directly through established manufacturer channels. An independent shop often has to go through an intermediary to obtain those same parts. That difference in acquisition cost matters when you're comparing what each business charges the customer.

I'm not arguing that dealerships don't mark up parts. Of course they do. I'm arguing that the idea that dealerships are making enormous margins on major OEM components is generally misguided. Their profitability is much more dependent on labor revenue and the additional services they sell.
Approaching this from a different angle. Does the mechanic (the one doing the actual work in a larger shop) still get paid a flat rate based on a labor/cost book? I.e. if the book says a brake job should take an hour and the labor rate is $100 you get that if you do it in 10 minutes or 5 hours? When I got out of high school I was looking at a school that did a double ASE cert in gas and diesel and it was explained like that. That BS plus not wanting to be greasy was why I got into construction.
Yes, a lot of dealerships and larger shops still operate on a flat-rate system. However, I think that model is starting to face some serious challenges. Fewer people are going to dealerships for routine maintenance (and maintenance in general, because the economy is fucked), and an increasing proportion of dealership work is warranty-related, which puts additional pressure on the traditional flat-rate model.

Personally, I think the better route for a technician entering the industry today is to find a shop that offers a salaried position with performance-based bonuses. It provides a little more stability while still rewarding productivity and efficiency.

I wouldn't be surprised if we see flat rate gradually phased out, or at least become considerably less common, over the next five years or so. I think the economics and changing dynamics of the industry are going to make it increasingly difficult to sustain as the predominant compensation model.
 

Kajiimagi

<Aristocrat╭ರ_•́>
6,804
11,460
You're conflating two entirely different arguments. A shop not wanting to install customer-supplied parts has absolutely nothing to do with the size of the markup they're applying to parts they source themselves. That's a liability, warranty, and profit-margin issue. If I bring you an alternator I bought online and it turns out to be defective, you're now stuck dealing with the labor, the customer, and the inconvenience of a part you didn't supply. That's a perfectly reasonable business decision, but it doesn't establish anything about OEM parts markup.

And I'm not sure why we're treating Gemini's generic parts markup estimates as some sort of authoritative industry data. A 50-100% markup on a midrange part might be perfectly representative of some independent shops, but that doesn't mean it's representative of dealership OEM pricing. You're lumping together independent shops buying through aftermarket distributors, independent shops sourcing OEM parts, and franchised dealerships buying directly through manufacturer distribution channels. Those are three different supply chains with different acquisition costs and pricing structures.

My original point was that dealerships generally have a significant advantage when sourcing OEM parts because they're buying directly through established manufacturer channels. An independent shop often has to go through an intermediary to obtain those same parts. That difference in acquisition cost matters when you're comparing what each business charges the customer.

I'm not arguing that dealerships don't mark up parts. Of course they do. I'm arguing that the idea that dealerships are making enormous margins on major OEM components is generally misguided. Their profitability is much more dependent on labor revenue and the additional services they sell.

Yes, a lot of dealerships and larger shops still operate on a flat-rate system. However, I think that model is starting to face some serious challenges. Fewer people are going to dealerships for routine maintenance (and maintenance in general, because the economy is fucked), and an increasing proportion of dealership work is warranty-related, which puts additional pressure on the traditional flat-rate model.

Personally, I think the better route for a technician entering the industry today is to find a shop that offers a salaried position with performance-based bonuses. It provides a little more stability while still rewarding productivity and efficiency.

I wouldn't be surprised if we see flat rate gradually phased out, or at least become considerably less common, over the next five years or so. I think the economics and changing dynamics of the industry are going to make it increasingly difficult to sustain as the predominant compensation model.
FYI When I looked into it, the year ended in '88. Doesn't sound like it's going to change.