Car ?'s

Siliconemelons

Siliconemelons

Ssraeszha Raider
14,178
22,687
I’ll be that guy, but a short screw in that thread crease is not going to cause a problem.
But it’s still funny like the stapled condom poster board notice for safe sex
 
Sludig

Sludig

Potato del Grande
11,307
12,203
1000003602.jpg
 
  • 1WTF
Reactions: 1 user
CaughtCross

CaughtCross

Ahn'Qiraj Raider
3,533
6,244
This youtube channel bought one of the new gen Tacomas. It broke doing some light off roading. Wonder if Toyota quality is slipping or they just got unlucky.

 
  • 1Like
Reactions: 1 user
Fucker

Fucker

Log Wizard
15,801
39,001
CaughtCross said:
This youtube channel bought one of the new gen Tacomas. It broke doing some light off roading. Wonder if Toyota quality is slipping or they just got unlucky.

Click to expand...

Slipping. They still haven't fixed the Tundra's grenading engine. $20-30k fix out of warranty depending on how many parts the engine takes with it when it shits a low end bearing.

That Tacoma popped a driveline on slippery ground. I watched the video and the whole truck shuddered when it popped. They need to go back to designing and building these things in Japan.
 
  • 1Like
Reactions: 1 user
Lanx

Lanx

<Prior Amod>
74,353
176,070
it's time to recondition my headlights, it's a little foggy, i've done it 2x or 3x, it's not really difficult, i prefer removing the headlights rather than painter taping it off

project farm just came out w/ a video


i've been using the 3m clear coat protector all this time, i ordered the sylvania and i'll see how that does in the coming years. (you can just order the spray, not the kit, since the kit is just a few pieces of sand paper... )

also my civic motor mounts are gone (car makes clunking noise when braking), looked at the passenger mount it's separated, and of course if youre gonna replace one cuz of old age, do the rest.
 
Last edited:
  • 1Like
Reactions: 1 user
Fogel

Fogel

Mr. Poopybutthole
15,643
66,508
Okay, but whats the best tail light restoration kit? And best kid for cleaning side mirrors!?
 
Siliconemelons

Siliconemelons

Ssraeszha Raider
14,178
22,687
Anything plastic - headlights / tail will be about the same product - I would say from his video - Sylvania kit

Anything that actually sands and refinishes and re-coats will be the best but longer / more steps process
 
Lanx

Lanx

<Prior Amod>
74,353
176,070
Siliconemelons said:
Anything plastic - headlights / tail will be about the same product - I would say from his video - Sylvania kit

Anything that actually sands and refinishes and re-coats will be the best but longer / more steps process
Click to expand...
yea just gotta get rid of the surface yellowing/oxidation and put a new uv coat on.
 
Kais

Kais

<Gold Donor>
948
1,949
Siliconemelons said:
Anything that actually sands and refinishes and re-coats will be the best but longer / more steps process
Click to expand...
I've used mothers, chemical guys, 3m and slyvania kits over the years. Hard to say which held up better. Sanding is sanding and the most important part, unfortunately most kits have bad choice of grit. They try to make up for it with the last step, the sealant coating, to smooth it out and claims of it hardening and protect the lens. Maybe it's true but any kind of coating will yellow over time or more likely get worn off by wind and road grit. If you have a soft fabric buffing wheel run that across the lens with a light polishing compound after the final highest grit sanding.
 
  • 1Like
Reactions: 1 user
Lanx

Lanx

<Prior Amod>
74,353
176,070
Kais said:
I've used mothers, chemical guys, 3m and slyvania kits over the years. Hard to say which held up better. Sanding is sanding and the most important part, unfortunately most kits have bad choice of grit. They try to make up for it with the last step, the sealant coating, to smooth it out and claims of it hardening and protect the lens. Maybe it's true but any kind of coating will yellow over time or more likely get worn off by wind and road grit. If you have a soft fabric buffing wheel run that across the lens with a light polishing compound after the final highest grit sanding.
Click to expand...
yea finishing w/ compond/polish is what gives it an edge imo
 
Break

Break

Golden Baronet of the Realm
4,725
12,956
CaughtCross said:
This youtube channel bought one of the new gen Tacomas. It broke doing some light off roading. Wonder if Toyota quality is slipping or they just got unlucky.

Click to expand...

If you read any Taco forum about this you'll see people talking straight out their butt like fanboys, like some of us were when we were younger about Nvidia or AMD or intel or 3dfx or the like 😂

Some claiming they over burdened it etc when the whole thing was caught on video and extremely milquetoast for offroading
 
Siliconemelons

Siliconemelons

Ssraeszha Raider
14,178
22,687
Break said:
If you read any Taco forum about this you'll see people talking straight out their butt like fanboys, like some of us were when we were younger about Nvidia or AMD or intel or 3dfx or the like 😂

Some claiming they over burdened it etc when the whole thing was caught on video and extremely milquetoast for offroading
Click to expand...

3dFX glide did the blurring scale of textures (think n64) while direct X just did direct scale of textures (think ps1)

As a Nintendo and 3dFX person I slammed on the others with their giant pixel syndrome all the time

is this thread about cars?!
 
  • 1Worf
Reactions: 1 user
Lanx

Lanx

<Prior Amod>
74,353
176,070
Wow ive really been neglecting this
0311241436_HDR.jpg

0311241538_HDR.jpg


was too lazy to take off the headlights, i forgot i have to remove the front bumper to do it, also did an engine clean (i watched a video where all you do is just spray tire foam all over and don't even wipe, and it works amazing! can't wash the car cuz the headlights have to "cure", so i got acrylic particles everywhere
 
Last edited:
  • 3Like
Reactions: 2 users
BrutulTM

BrutulTM

Good, bad, I'm the guy with the gun.
<Silver Donator>
15,766
75
There's no way they can't feel that in the car. The power of denial.
 
Lanx

Lanx

<Prior Amod>
74,353
176,070
0314241653_HDR.jpg


old vs new, yea basically didn't have an engine mount

theres an alignment issue on the new mount, i think the frame is bent...

now i got a hydralic ram kit on the way lulz, gonna just leave my car on jack stands for a few days until it comes in. (guess i could change the oil)
 
You must log in or register to reply here.