Cylinder deactivation is one of those technologies that needs to go to the trashbin of history. I can't think of a single engine it's been implemented on that hasn't completely torpedoed the reliability. Good to know it's a simple fix if I ever go that route.VCM (Variable Cylinder Management) on those have been bad for eons. You can get a VCM/ECO bypass module that takes 10 minutes to install, costs $150. VCM 2.0 on the previous gen was known to break piston rings, engine mounts, cause excess oil burning. I don't know about the VCM implementation on the new ones, but it can be bypassed with said kit.
I don't think id heard anything yet about it killing c8s.Cylinder deactivation is one of those technologies that needs to go to the trashbin of history. I can't think of a single engine it's been implemented on that hasn't completely torpedoed the reliability. Good to know it's a simple fix if I ever go that route.
Same goes for idle stop/start on a non-hybrid. Completely annoying and saves nearly no fuel in the real world. On my wife's old car, I intentionally tried to maximize the off time as an experiment. After 8000 miles of driving a pretty much 50/50 city/highway split, it saved 4 liters of fuel. Thanks California/Obama!
crazy deals on trucks out there now...
Depends on where you live I guess.Just got a Tesla Model 3 during the big sale they had.
View attachment 592883
Thinking about making and putting an "I appreciate all the good things Elon has done for humanity and the Earth over the last 15 years" sticker on it, wondering how many days it would last before it got keyed or damaged.
Incredible car (especially the acceleration, the climate control, and the safety features).
However I can already tell that charging it is a pain in the ass. Charging stations are either too slow or too pricey, and sometimes both at the same time. Like one charger cost $4 for what ended up being just under 10% charge and it took an hour...ridiculous.
No you don't. Modded cars are more personal. However, the ZF can handle that easy. Not sure if the 6 speed can.Looks like 2025 production is complete on the M2, so I got one of the first 2026 allocations. Delivery should still be around October. Been watching a bunch of videos on the ECU unlocks they do for these and are getting like 600 hp at the wheels on the tune alone. Need to talk myself out of this shit...
So you feel the need to talk yourself out of.... Happiness? Joy? Fulfillment? Help me understand here, have you thought about seeing a therapist about this?Looks like 2025 production is complete on the M2, so I got one of the first 2026 allocations. Delivery should still be around October. Been watching a bunch of videos on the ECU unlocks they do for these and are getting like 600 hp at the wheels on the tune alone. Need to talk myself out of this shit...
From what I've read most suggest not going higher than 500 lb-ft on the stock manual, though it doesn't look like too many people are having problems on the higher range of that. I think the manual is around 405 lb ft stock at 473hp. I will probably end up pushing up against the 500 lb-ft on the tune. Worst case scenario, Wagner makes a clutch for the G87 that can handle like 800 lb-ft! It ain't cheap though. The cost to unlock my ECU is already pretty fucking retarded as there is apparently only one company who is doing it on late model beamers and they are in Europe. Will cost me about a grand for that, then another 700ish for the BootMod3 software. From the results I've seen, it's worth it.No you don't. Modded cars are more personal. However, the ZF can handle that easy. Not sure if the 6 speed can.
I’d take that over the $5,000 for ECU tunes that I see. Surely someone else makes clutches that will fit? Dodson, Monster, etc.From what I've read most suggest not going higher than 500 lb-ft on the stock manual, though it doesn't look like too many people are having problems on the higher range of that. I think the manual is around 405 lb ft stock at 473hp. I will probably end up pushing up against the 500 lb-ft on the tune. Worst case scenario, Wagner makes a clutch for the G87 that can handle like 800 lb-ft! It ain't cheap though. The cost to unlock my ECU is already pretty fucking retarded as there is apparently only one company who is doing it on late model beamers and they are in Europe. Will cost me about a grand for that, then another 700ish for the BootMod3 software. From the results I've seen, it's worth it.