Pics and always contact via email for records.You can reverse the CC payment, right? Make sure to document that shit (sorry...)!
Sorry if I’m missing something obvious, but why would you need to drill? Seems to me you could pull the outlet box out and use wire pull rods to run your ethernet cables through the existing penetrations.So concrete block walls are raping my wifi. I want to run ethernet jacks to the bedrooms and living room via a switch in the attic. Crawled up in the attic and found this. This goes down to a power outlet... How much of a bitch would it be to drill down and run a cable?
View attachment 287001
Id like to keep the existing outlet for electrical. Could I somehow put an outlet next to it and use the same hole down from attic?Sorry if I’m missing something obvious, but why would you need to drill? Seems to me you could pull the outlet box out and use wire pull rods to run your ethernet cables through the existing penetrations.
Ended up building this for the gentlemen that I did the faux beams for. Busted this out in 2 days with my buddy.
View attachment 286249
Right right but that hole goes down to my electrical outlet that I'd like to keep.. Maybe something like this..Get a snake. You should be able to work from the outlet and get the snake up to that point, then pull a pull string, then pull your cable through. Cement walls are a real pig on wifi. Other than running lines I have not yet found a good work around.
Right right but that hole goes down to my electrical outlet that I'd like to keep.. Maybe something like this..
View attachment 287121
Ok, let me pull the plate off later this week and take some pics. Think I'll be able to communicate better that wayRight, but you can pull any cable you need through the same hole. Shouldn't be a hard job.
Ok, let me pull the plate off later this week and take some pics. Think I'll be able to communicate better that way
NoBasically, what you're saying is the hole is too small to fit your snake?
Like big dirk said, pull the cable through the existing hole and you can just set two plates or a joint plate like the one you posted.
Ok. I think i need to just pull the plate to see what you guys are talking about. Ill do that friday after and report back. ThanksLike big dirk said, pull the cable through the existing hole and you can just set two plates or a joint plate like the one you posted.
Not to insult your intelligence, but I’d turn off the breaker for that outlet before you pull the box out.Ok. I think i need to just pull the plate to see what you guys are talking about. Ill do that friday after and report back. Thanks
Yes. Literally just concrete block painted.Do you have interior walls that are concrete?